 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Tel : Fax : email : 0044 (0)118 979 1238 0044 (0)118 979 1283 info@actcrystals.com ACTMPX11-6 LVPECL Saw Oscillator The ACT MPX11-6 is a PCB Based, SMD, LVPECL Saw oscillator. This 14 x10.3mm device can be used in a wide range of applications, especially where a high fundamental frequency with low phase noise and jitter are required. This device is offered in a range of standard, frequencies from 311.04~625.0 MHz, common to communications applications.( SONET / SDH etc.. ) The devices ar available reeled ( 500 pcs ) or loose to suit high/low volume requirements. Specification Parameter Supply Voltage Frequency Range Frequency Stability Temp Operating Range Temp Storage Range Supply Current (max) Duty Cycle Output Level `0' Output Level `1' Rise & Fall Time (max) Output Load Jitter Aging Symbol VDD fo f/fo Topr Tstg Iop Tw/t VOL VOH TrTf N/CL Fa Specification 3.3VDC 10% 311.040 MHz, 312.500 MHz,400.00MHz, 622.080MHz, 625.00MHz 25ppm ~ 50ppm 0 ~ +70C Std ( -40 ~ +85C available) -55 to +125C 130mA max 45/55% VDD-1.620Vdcmax VDD -1.025Vdc min 800pS max VDD-2.0Vdc to 50 ohm 1.0pS max 3ppm / year -65dBc/Hz -98dBc/Hz -125dBc/Hz -130dBc/Hz -135dBc/Hz Condition Please specify Please specify Please specify Phase Noise 12kHz to 20MHz @25C @10Hz @100Hz @1kHz @10kHz @100kHz Dimensions (mm) Pin Connection #1 #2 #3 #4 #5 #6 Tri-state N/C Ground Output Complementary Output Vdd Pad surface material Au Please note that all parameters can not necessarily be specified in the same device Customer to specify : Frequency, Frequency Stability, Operating Temperature Range, In line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice ISO9001:2000 Registered For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, UK http://www.actcrystals.com 1 of 3 Tel : Fax : email : 0044 (0)118 979 1238 0044 (0)118 979 1283 info@actcrystals.com ACTMPX11-6 TAPE AND REEL DIMENSIONS (mm) Reel sIze = 500 pcs In line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice ISO9001:2000 Registered For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, UK http://www.actcrystals.com 2 of 3 Issue: 1 D2 Date: 26/07/05 Tel : Fax : email : 0044 (0)118 979 1238 0044 (0)118 979 1283 info@actcrystals.com ACTMPX11-6 MAXIMUM REFLOW PROFILE Jitter for centre frequency 312.5MHz High Frequency Modulation Summary Mean Min Max Pk-Pk 1-Sigma 1.673ps 0.885ps 2.358ps 1.473ps Pk-Pk 6.477ps 4.547ps 10.004ps 5.457ps PJ Freq 270.056s 19639296MHz 1.686ps 472.553993kHz V1 -0.001953V RJ 151.489fs 0.536ps 1-clock(peak) N-Clock(Pk-Pk) V2 -0.001953V Wave Form 312.5MHz Centre Frequency Time measurements Period Minimum Maximum 1 sigma Peak to Peak Hits Frequency Duty Cycle 3.201642ns 3195109ns 3.208157ns 2.467ps 13.049ps 300 312.50112342MHz 49.41% DC Voltages Vstart Vstop -0.001953V -0.001953V Vp-p Vmax Vmin 1.441406V 0.71875V -0.722656V In line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice ISO9001:2000 Registered For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, UK http://www.actcrystals.com 3 of 3 |
Price & Availability of ACTMPX11-6
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |